Kastas Sealing Technologies
Firma
   
Language Selection
Informazioni Tecniche
Hydraulic Sealing Elements
Working Principle Of Sealing Elements
Surface Roughness
System Tolerances And Designs
General Installation Information
Choosing Sealing Elements
Permissible Sealing Gap
Pneumatic Sealing Elements
Guide Elements
O’rings
General Installation Information
Storage Conditions
  
/ Informazioni Tecniche / Hydraulic Sealing Elements / Surface Roughness
Surface Roughness

SURFACE ROUGHNESS
The surfaces that the sealing elements will be working should be honed, grinded and polished. Surface roughness should be according to the catalogue information of the respective sealing element. Figure 4 shows the schematic of sealing element material matching with the surface roughness values. As it is seen in Figure 4, rubber materials can adopt with the irregulations of the surface; on the other hand PTFE material adaptation is not as good as the other sealing materials. Ra value that we indicate in our catologue is the arithmetic average of the absoloute roughness values in specific length of surface (Figure 5).



Rz value that we indicate in our catologue is the average of the 5 consecutive maximumum roughness values in specific length of surface, Rmax is the maximum of these values (Figure 6).

 

During the working of the sealing element average surface contact area does have a important role besides the Ra and Rz values. Surface contact area Rmr is the ratio of surface roughness cutted with C depth and the proportion of the contact surface areas to non contact surface areas in the specific surface length. Kastaş supplys Rmr values in the catologue in order to maximize the performance of the sealing elements according to C=Rz/2 (Figure 7).

As it can be seen from the above graphs, similar
4 values of Ra and Rz surface cutted with C depth,
we see that Rmr value varies between 35% and 90%.
The surface roughness on last graph shown on the left side gives an example of the ideal surface. It is also seen that we do not want to have Rmr value to be 100%.
If the Rmr value is higher than 90%, the sliding surface behaves like a mirror and do not leave any oil film on the surface. This basically makes the sealing element
to be damaged in shorter period of time. 





 






Privacy Policy
Azienda
Informazioni Relative a Kastas
R&D
Capacità Produttiva
Gestione Qualità
Vendite e Logistica
Responsabilità Aziendale
Carriera
Prodotti
Tenute Idrauliche
Guarnizioni Pneumatiche
Elementi di Guida
Elementi di Tenuta Statici
Elementi di Guida Speciali
SmartSeal Custom-Made Machined Seals
Settori Industriali
Macchine Agricole
Macchine da Costruzione
Presse Idrauliche
Idraulica Mobile
Industria Mineraria
Metal Processing
Plastic Injection Moulding Machines
Informazioni Tecniche
Hydraulic Sealing Elements
Pneumatic Sealing Elements
Guide Elements
O’rings
General Installation Information
Storage Conditions
News & Video
News
Eventi & Fiere
Download
Video
Kastas Zoom
Newsletter
Contatto
Sede
Kastas Europe GmbH
Filiali
Distributori
Modulo Contatto
© All rights reserved 2020
Asersoft