Kastas Sealing Technologies
Anmeldung
   
Language Selection
Technische Informationen
Hydraulic Sealing Elements
Pneumatic Sealing Elements
Guide Elements
O’rings
General Installation Information
Characteristic Properties Of Rubber Materials
Storage Conditions
  
/ Technische Informationen / General Installation Information / General Assemblage Information
General Assemblage Information

There appears a lot of problems because of incorrect assemblage of hydraulic and pneumatic sealing elements. It is vital that assemblage rules should be obeyed in order to make successful applications in hydraulic and pneumatic cylinders.


1- It is very important that the entire system and the fitting area should be cleaned out. There should not be any
    dirt and foreign particles in the area (for example, chip).

2- Before fitting, the measures of housing and the seal, radii, the chamfer and the surface quality must be checked 
    and cleaned out. The burrs on sharp edges are very dangerous.
 
3- The cleanliness of the sealing elements should be checked.
 
4- All the sealing elements should be installed after being oiled with system oil. Oiling with grease should be avoided.
 
5- Installation tools with sharp edges should not be used.
 
6- Uncontrolled heating of sealing elements before fitting is ruther dangerous.

7- While testing the cylinder after fitting, there should not be out of specified measures of pressure, temperature,
     linear velocity etc. given in our catoloque. 
 
8- In case of carrying out final procedures (ie. Painting), the heat over 80¡C should be avoided.
 
 




 
Anmeldung

  Registrierung
  Passwort Vergessen?
Follow Us
 


Kastas Sealing Technologies Europe GmbH


Impressum
Unternehmen
Firmenprofil
Forschung und Entwicklung
Fertigungstechnologien
Qualitńtsmanagement
Vertrieb und Logistik
Unternehmensverantwortung
Karriere
Produkteá
Hydraulikdichtungen
Pneumatikdichtungen
FŘhrungselemente
Statische Dichtungen
Sonderdichtungen
SmartSeal Custom-Made Machined Seals
Industrien
Land- und Forstwirtschaft
Baumaschinen
Hydraulische Pressen
Materialtransport
Bergbauindustrie
Walzwerke
Kunststoff Spritzgie▀maschinen
Technische Informationen
Hydraulic Sealing Elements
Pneumatic Sealing Elements
Guide Elements
O’rings
General Installation Information
Storage Conditions
News und Medien
Neuigkeiten
Events & Ausstellungen
Download Center
Videos
Kastas Zoom
Newsletter
Kontakt
Firmensitz
Kastas Europe GmbH
Filialen
Hńndler
Kontaktformular
© All rights reserved 2018
Asersoft